-
The ceiling grilles are designed for air supply as well as for exhaustion. Due to the fixed lamellas they are suitable mainly for creating horizontal air flows. The specially developed fittings and pressure boxes provide optimal air flow distribution. The permissible temperature difference of the supplied air is ±10˚ С. The grilles can be mounted in premises with a height up to about 4 m. -
The ceiling grilles are intended for installation in industrial and commercia premises. They are suitable for tall premises (e.g. workshops, airports, theaters, bank halls) as well as for lower spaces with a height of more than 3,80 m (e.g. assembly workshops). The lamellas are adjustable and allow the creation of horizontal airflow under cooling and vertical flow in heating. The ceiling grilles are connected to the air ducts by means of a pressure box, which may be of a vertical or horizontal configuration. -
The grilles are used in the ventilation and air-conditioning system for precise airflow regulation. They are made of galvanised or aluminium special profiles in combination with polyamide components. Depending on the customer's requirements they can be equipped with an electric actuator. -
They are designed for air transport in the ventilation and air conditioning installations. Air ducts are made of galvanised steel with a thickness from 0,5 to 0,8 mm. Depending on customer requirements they can be painted by powder coating. -
They are designed for air transport in the ventilation and air conditioning installations. Air ducts are made of galvanised steel with a thickness from 0,5 to 0,8 mm. Depending on customer requirements they can be painted by powder coating. -
The position of the lamellas in the ceiling adjustable diffusers type TD can be varied (horizontal, inclined or vertical airflow) in order to optimise the entry of air into the room during cooling or heating while meeting the necessary comfort requirements. The diffuser can be used in tall premises (e.g. workshops, airports, theaters, bank halls) as well as in lower spaces with a height more than 3,80 m, e.g. assembly workshops. -
Due to their small total height the ceiling linear diffusers are suitable for installation in low ceiling cavities, e.g. in suspended ceilings. They provide good mixing and rapid reduction of temperature difference and the rate of supplied air. They are connected to the air duct system by a plenum box and flexible air ducts. The diffuser type TLD is intented for installation in premises with a height of approximately from 2,60 m to 4,00 m. The recommended temperature difference of the supplied air is ±10˚ С. The air supply direction can be changed in accordance with the desired room conditions. The stable airflow of the ceiling linear diffusers type TLD makes them suitable for use in systems with constant or variable volumetric flow. -
The filters are intended for air filtration in the ventilation and air conditioning installations. -
They are designed for air transport in the ventilation and air conditioning installations. Air ducts are made of galvanised steel with a thickness from 0,5 to 0,8 mm. Depending on customer requirements they can be painted by powder coating. -
The diffusers are intended for floor and wall installation, with perimeter frame and horizontal fixed profile lamellas. The airflow can be perpendicular to the plane of the diffuser or at an angle of 15°. They are used for uniform air supply in the air conditioning and ventilation systems. The diffusers are made of anodised aluminium profiles. The connection with the air duc system is by a plenum box and flexible air ducts. -
They are used in ventilation and air conditioning systems to manually regulate the air flow. They are made of galvanized steel in combination with polyamide components. -
The mounting elements are used for installation of ventilation, air conditioning, water supply and plumbing equipment. They are made of galvanised steel.
